Close

Site Information

  • Image 1

Integrated far-distance UHF RFID reader (1-15meters)

Brand: LinkSprite
$800.00
SKU:
LSID-0703
Weight:
5.00 LBS
Shipping:
Calculated at checkout
Quantity:

Product Description

In the far-distance RFID system, the ID tag has much less energy compared to that of the reader. This imposes a very high requirement on the reader's receiver sensitivity. In LinkSprite’s far-distance RFID system, the receiving and transmitting paths are separate, and using different frequencies.  Normally, the transmitting power is between 100mW~500mW.

LSID-0703 has the feature of multiple-protocols, fast response time, multiple-tag reading, directional antenna, and water-proof design that can be used outdoors.

 

The application of LSID-0703 can be used in the following:

 

  • Logistical and warehouse management.
  • Smart parking lot management.
  • Manufacturing processes management.
  • Club management, library management, and other application of Internet of Things.

 

After first powered on, the reader will buzz once to indicate that it starts to work.  When there is tag approaching the reader, it will buzz to indicate that it’s sending the data. For the same tag, the read interval can be configured. After read, if the same tag is still in the read area, there will be no further indication, and no data will be sent.  If the time lapse exceeds interval or different tags enter the reading zone, the reader will read the card and send out data.

When  using the reader, please avoid the reader to be in close contact with metal devices as metal devices can absorb the RF signal, and impact the reading distance.

There  are SDK for this reader that comes with Visual Basic and Visual C++ demo program.

 

Specification:

 

Specification

 

Frequency

920~925MHz   , American Standard  902~928MHz,   Specified fix frequencies, or frequencies hopping

Protocols

ISO18000-6B,ISO18000-6C (EPC GEN2)

Frequency hopping

FHSS or Fixed   Frequency, set by software

Working Mode

Automatic reading at programmed timing interval, triggered reading, reading by software command. The working mode is configured by software.

RF transmitted Power

0-30dBm, configurable by software

Reading   Distance

Adjustable reading distance: 1   -  1 5   meter

Reading  Sensitivity

Bipolarity reading

Response Time

Response time of single tag   with 64 bit ID  <   6ms

Antenna

Integrated directional antenna, gain 12dB

Interfaces

RS485,RS232,Wiegand26,Wiegand34,RJ45(TCP/IP),CANBUS

Voltage

DC+12V

Reading Indicator

Buzzer

Power

4W

 

-20 degree C - +80 degree C

Store Temperature

-40 degree C - +125 degree C

Working Humidity>

20%   (no  condensing)

Size

450mm×450mm×75mm

 

Download:

 

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category